Blister cutting: plastic products after plastic forming […]
Blister cutting: plastic products after plastic forming, through the punching machine, the large sheets are cut into individual products by knife die. Also called cutting, cutting, die cutting, etc.
Blister Folding: There is a kind of blister packaging in the blister packaging. The three sides of the blister are folded to the back with a folding machine, so that the paper card can be inserted into the hem in the next packaging process to form a plug. Card packaging.
Blister scratches: There are scratch marks on the blister finish, especially on the transparent blister. If the trace is too long and too large, the blister becomes a defective product and cannot be used for high-grade packaging.
Blister cable: some undesired line protrusions produced during the production of plastic forming (not on the mold), need to re-modify the mold (reducing the height and increasing the slip of the garden) and adding additional pressure mold (we call it Solve) to solve. When the cable is too large, it is regarded as a defective product and cannot be used for high-grade blister packaging. However, in the field of component turnover trays, as long as the wires are arranged neatly and do not affect the function of use, they should be regarded as qualified products. The pull line is also called: Laqiu, cramps and so on.
